Adding An Audio Sound On A Recorded Tape - Sony DCR-PC115E Operating Instructions Manual

Audio dubbing
Adding an audio sound on a
recorded tape
Choose a connection mentioned before, and
connect audio equipment or microphone to your
camcorder. Then follow the procedure below.
(1) Insert the recorded tape into your camcorder.
(2) Set the POWER switch to VCR on your
camcorder.
(3) Locate the recording start point by pressing
N. Then press X at the point where you
want to start recording to set your camcorder
to the playback pause mode.
(4) Press AUDIO DUB on the Remote
Commander. The green
appears on the screen.
(5) Press X and start playing back the audio you
want to record at the same time.
The new sound is recorded in stereo 2 (ST2)
during playback. During recording new
sound, the red
(6) Press x at the point where you want to stop
recording.
120
X indicator
appears on the screen.
AUDIO DUB
(1)
(2)
(3)
(4)
(5)
(6)
x
N
X
X
X