Self-Diagnosis Display - Sony DCR-VX2000E Operating Instructions Manual

English

Self-diagnosis display

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a
combination of a letter and figures) on the
LCD screen, display window, or in the
viewfinder. If a 5-digit code is displayed, check
the following code chart. The last two digits
(indicated by ss) will differ depending on
the state of your camcorder.
Five-digit display
C:04:ss
C:21:ss
C:22:ss
C:31:ss
C:32:ss
E:61:ss
E:62:ss
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or nearest local authorized Sony service facility.
222
Cause and/or Corrective Actions
• You are using a battery pack that is not an "InfoLITHIUM" battery pack.
c Use an "InfoLITHIUM" battery pack. (p. 14)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least one hour to acclimatize.
(p. 234)
• The video heads are dirty.
c Clean the heads using the Sony DVM12CL cleaning cassette (not supplied). (p.
235)
• A malfunction other than the above.
c Remove the cassette and insert it again, then operate your camcorder.
c Disconnect the mains lead of the AC power adaptor or remove the battery pack.
After reconnecting the power source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer and inform them of the 5-digit code. (example: E:61:10)
On the LCD screen or in the
viewfinder, on the display
window
C:21:00
Self-diagnosis display
•C:ss:ss
You can service your camcorder
yourself.
•E:ss:ss
Contact your Sony dealer or
nearest local authorized Sony
service facility.