Sony DCR-VX2000E Operating Instructions Manual page 107

Dubbing a tape
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Set the input selector on the VCR to the DV
input position if the VCR is equipped with
an input selector. For details, refer to the
operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
: Signal flow/
When you have finished dubbing a
tape
Press x on both your camcorder and the VCR.
You can connect one VCR only using the
i.LINK cable (DV connecting cable)
Pictures processed by the digital effect or
picture effect function
Pictures processed by the digital effect or
picture effect function are not output through
the DV IN/OUT jack.
If you record a playback pause picture with
the DV IN/OUT jack
The recorded picture becomes rough. And
when you play back the picture using other
video equipment, the picture may jitter.
(1)
(2)
(3)
(4)
(5)
DV IN/OUT
(not supplied)/
x
DV S VIDEO LANC
DV IN/OUT
107