Sony DCR-VX2000E Operating Instructions Manual page 123

Dubbing only desired scenes
– Digital program editing
Erasing the last program
To change the end of the last program, delete
the CUT-OUT mark.
To erase the whole program, delete both the
CUT-IN and CUT-OUT marks.
(1) Turn the SEL/PUSH EXEC dial to select
UNDO, then press the dial. The last set
program mark flashes.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial and the
setting is cancelled.
To cancel erasing
Select RETURN in step 2, then press the SEL/
PUSH EXEC dial.
Erasing all programs
(1) Select VIDEO EDIT in the menu settings.
Turn the SEL/PUSH EXEC dial to select
ERASE ALL, then press the dial. All the
program marks flash.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial and the
settings are cancelled.
To cancel erasing all programs
Select RETURN in step 2, then press the SEL/
PUSH EXEC dial.
To cancel a program you have set
Press MENU.
The program is stored in memory until the
tape is ejected.
(1)
(2)
(1)
(2)
123