Recording - Basics; Recording A Picture - Sony DCR-VX2000E Operating Instructions Manual

— Recording – Basics —

Recording a picture

Your camcorder automatically focuses for you.
(1) Remove the hood cap and pull the hood
cap string to fix it.
(2) Install the power source and insert a
cassette. See "Step 1" and "Step 2" for more
information (p. 13 to 21).
(3) Set the POWER switch to CAMERA while
pressing the small green button. Your
camcorder is set to the standby mode.
(4) Slide OPEN in the direction of the B mark
to open the LCD panel.
The picture now being shot is displayed on
the LCD screen, and it disappears from the
viewfinder screen.
(5) Press START/STOP. Your camcorder starts
recording. The "REC" indicator appears.
The camera recording lamps located on the
front and rear of your camcorder light up.
To stop recording, press START/STOP
again.
You can use REC START/STOP located on
the front instead of START/STOP on the
rear.
Camera recording lamps/ Microphone/
4
2
5
POWER
22
REC START/STOP
40min
REC 0:00:01
(1)
(2)
(3)
(4)
(5)
1
B
LOCK
3
P O W E
R