Sony DCR-VX2000E Operating Instructions Manual page 150

Labeling a cassette
To change the label you have made
Insert the cassette to change the label, and
operate in the same way as you do to make a
new label.
If you set the write-protect tab of the tape
to lock
You cannot label the tape. Slide the write-
protect tab to release the write protection.
If you have superimposed titles in the
cassette
When the label is displayed, up to four titles
also appear.
When the "-----" indicator has fewer than 10
spaces
The cassette memory is full.
The "-----" indicates the number of characters
you can select for the label.
To erase a character
Turn the SEL/PUSH EXEC dial to select [ C ],
then press the dial. The last character is erased.
To enter a space
Select [ ], then select the blank part.
C
150