Sony DCR-VX2000E Operating Instructions Manual page 140

Audio dubbing
If you set the write-protect tab of the tape
to lock
You cannot record on the tape. Slide the write-
protect tab to release the write protection.
We recommend that you add new sound on
a tape recorded with your camcorder
If you add new sound on a tape recorded with
another camcorder (including an other
DCR-VX2000E), the sound quality may
deteriorate.
To add new sound more precisely
Press ZERO SET MEMORY on the Remote
Commander at the point where you want to
stop recording later in playback mode. Then,
follow the procedure from step 3. Recording
automatically stops at the point where ZERO
SET MEMORY was pressed.
On blank portions
You cannot add an audio.
You can adjust the recording level manually
using the recording adjustment display in
the following cases:
– Dubbing with an optional external
microphone or audio equipment through the
MIC jack
– Dubbing with an optional external
microphone installed into the intelligent
accessory shoe
– Dubbing with the internal microphone
140