Sony DCR-VX2000E Operating Instructions Manual page 236

Maintenance information and
precautions
If the above problem, [a] or [b] occurs, clean
the video heads for 10 seconds with the Sony
DVM12CL cleaning cassette (not supplied).
Check the picture and if the above problem
persists, repeat cleaning.
Cleaning the LCD screen
If fingerprints or dust make the LCD screen
dirty, we recommend using a LCD Cleaning
Cloth (not supplied) to clean the LCD screen.
Charging the vanadium-
lithium battery in your
camcorder
Your camcorder is supplied with a vanadium-
lithium battery installed so as to retain the date
and time, etc., regardless of the setting of the
POWER switch. The vanadium-lithium battery
is always charged as long as you are using
your camcorder. The battery, however, will get
discharged gradually if you do not use your
camcorder. It will be completely discharged in
about four months if you do not use your
camcorder at all. Even if the vanadium-lithium
battery is not charged, it will not affect the
camcorder operation. To retain the date and
time, etc., charge the battery if the battery is
discharged.
Charging the vanadium-lithium battery:
•Connect your camcorder to mains using the
AC power adaptor supplied with your
camcorder, and leave your camcorder with
the POWER switch turned off for more than
24 hours.
•Or install the fully charged battery pack in
your camcorder, and leave your camcorder
with the POWER switch turned off for more
than 24 hours.
236
[a]
or/
[b]