Siemens SINUMERIK 840D sl Operation/Programming Manual page 265

08/2005
5
Z1 Machining depth (inc.)
FZ Depth infeed rate
W Character height
DX1 Character spacing
DX2 Total width (alternative to DX1) – (for linear alignment only)
α1
Text direction (for linear alignment only)
α2
Arc angle (alternative to DX1) – (for curved alignment only)
The center point of the arc is the workpiece zero.
Peripheral surface/Peripheral surface C:
Y0 Reference point in Y direction (abs.)
C0 Reference point (alternative to Y0) – (for linear alignment only)
R Reference point on longitudinal polar axis (alternative to Y0) – (for curved alignment
only)
Z0 Reference point in Z direction (abs.)
α0
Reference point on angular polar axis (alternative to Z0) – (for curved alignment
only)
Reference point in X direction (abs.)
X0
Machining depth (inc.)
X1
Depth infeed rate
FX
Character height
W
Character spacing
DY1
Total width (alternative to DY1) – (for linear alignment only)
DY2
α1
Text direction (for linear alignment only)
α2 Arc angle (alternative to DY1) – (for curved alignment only)
Center point of arc (abs.) – (for curved alignment only)
YM
Center point of arc (abs.) – (alternative to YM)
CM
Center point of arc (abs.) – (for curved alignment only)
ZM
End face Y:
CP Positioning angle for machining area
X0 Reference point in X direction (abs.)
L0 Reference point on longitudinal polar axis (alternative to X0)
Y0 Reference point in Y direction (abs.)
C0 Reference point on angular polar axis (alternative to Y0)
Z0 Reference point in Z direction (abs.)
Z1 Machining depth (inc.)
FZ Depth infeed rate
W Character height
DX1 Character spacing
DX2 Total width (alternative to DX1) – (for linear alignment only)
α1
Text direction (for linear alignment only)
α2
Arc angle (alternative to DX1) – (for curved alignment only)
The center point of the arc is the workpiece zero.
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
ShopTurn Functions
5
5.5 Milling
mm
mm/min
mm/tooth
mm
mm
mm
Degrees
Degrees
mm
mm
mm
mm
Degrees
mm
mm
mm/min
mm/tooth
mm
mm
mm
Degrees
Degrees
mm
Degrees
mm
mm
mm
mm
Degrees
mm
mm
mm/min
mm/tooth
mm
mm
mm
Degrees
Degrees
5-265