Grooving Residual Material - Siemens SINUMERIK 840D sl Operation/Programming Manual

ShopTurn Functions
5
5.4 Contour turning

5.4.8 Grooving residual material

Parameters
T, D, F, S, V See Sec. "Creating program blocks".
Machining
type
Stock removal Stock removal direction: Longitudinal or transverse
direction
Machining side Machining side:
For stock removal in longitudinal direction: External or internal
For stock removal in transverse direction: end face or rear side
D Infeed depth for roughing (inc.)
XDA 1. grooving limit tool (inc) – (end face or rear face only)
XDB 2. grooving limit tool (inc) – (end face or rear face only)
U Finishing allowance in X and Z direction (inc) – (roughing only) – (alternative to UX
and UZ)
UX Finishing allowance in X direction (inc) – (roughing only) – (alternative to U)
UZ Finishing allowance in Z direction (inc) – (roughing only) – (alternative to U)
Stock Compensation allowance for contour or not – (finishing only)
allowance
U1 Compensation allowance in X and Z direction (inc) – (with allowance only)
Positive value: Compensation allowance is not removed
Negative value: Compensation allowance is removed in addition to finishing
allowance
DI Distance after which feed interruption occurs - (only for roughing)
Set machining Limit machining area or not
area limits
XA Limit X (abs) – (with limited machining area only)
XB Limit X (abs or inc) – (with limited machining area only)
ZA Limit Z (abs) – (with limited machining area only)
ZB Limit Z (abs or inc) – (with limited machining area only)
N Number of grooves
5-230
The "Grooving residual material" function is used when you want to
machine the material that remained after grooving along the contour.
During grooving along the contour, ShopTurn automatically detects
any residual material and generates an updated blank contour.
Material that remains as part of the finishing allowance is not residual
material. The "Grooving residual material" function allows you to
remove unwanted material with a suitable tool.
The "Grooving residual material" function is a software option.
Press the "Contour turning" and "Grooving resid." soft keys.
Grooving
resid.
Roughing
Finishing
Description
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
5
Unit
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
♥ Siemens AG, 2005. All rights reserved