Siemens SINUMERIK 840D sl Operation/Programming Manual page 196

ShopTurn Functions
5
5.3 Turning
Parameters
T, D, F, S, V See Sec. "Creating program blocks".
Machining
type
Position Roughing position:
Direction Roughing direction (flat or lengthwise) in the coordinate system:
Reference point ¬ (abs)
X0
Z0 Reference point (abs)
End point ¬ (abs) or end point (inc)
X1
Z1 End point (abs or inc)
D Infeed depth (inc) – (for roughing only)
UX Final machining allowance in X direction (inc) – (for roughing only)
UZ Final machining allowance in Z direction (inc) – (for roughing only)
FSn Chamfer (n=1 to 3) alternative to Rn
Rn Radius (n=1 to 3) alternative to FSn
Xm-Zm-α1-α2 Select which of the parameters Xm, Zm, α1 and α2 should be displayed – (only for
stock removal cycle with oblique lines, radii and chamfers)
Intermediate point ¬ (abs) or intermediate point (inc)
Xm
Zm Intermediate point (abs or inc)
α1
Angle of first path (only for stock removal cycle with oblique lines, radii and
chamfers)
α2
Angle of second path (only for stock removal cycle with oblique lines, radii and
chamfers)
5-196
Roughing
Finishing
parallel to Z axis (longitudinal)
Outside Inside
X X
Z
X
X
Z
Description
parallel to X axis (plane)
Outside
X
Z Z
X
Z Z
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
Unit
Inside
X
Z
X
Z
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Degrees
Degrees
♥ Siemens AG, 2005. All rights reserved.
5