Siemens SINUMERIK 840D sl Operation/Programming Manual page 209

08/2005
5
Parameters
T, D, F, S, V See Sec. "Creating program blocks".
SV Speed limit for constant cutting rate (with V only)
Reference point ¬ (abs)
X0
Z0 Reference point (abs)
FS Chamfer alternative to R
R Radius alternative to FS
Depth for feedrate reduction ¬ (abs) or depth for feedrate reduction (inc)
X1
FR Reduced feedrate
SR Reduced speed of rotation
Parts gripper Yes: Extend workpiece drawer
No: Do not extend workpiece drawer
XM Depth to which the drawer must be extended (abs)
Final depth ¬ (abs) or final depth (inc)
X2
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
Press the "Turning" and "Part" soft keys.
Part >
Description
ShopTurn Functions
5
5.3 Turning
Unit
rpm
mm
mm
mm
mm
mm
mm/rev
rpm
mm
mm
5-209