Drilling With Manual Machine; Turning With Manual Machine - Siemens SINUMERIK 840D sl Operation/Programming Manual

Working with Manual Machine
6
6.4 More complex machining in manual mode

6.4.1 Drilling with manual machine

6.4.2 Turning with manual machine

Thread cutting
Idle
cut
6-340
For drilling on the face or peripheral surface of a workpiece, the
following cycles are available to you under Automatic:

Axial drilling

Axial threading

Centering

Drilling

Reaming

Deep-hole drilling

Thread tapping

Thread milling
The parameters of the input screen forms correspond to the
parameters under Automatic (see Sec. "Drilling").
Drilling can only be performed at individual positions. To define the
position, input the parameters X0 and Y0 (face machining) or Y0 and
Z0 (peripheral surface machining).
For turning a workpiece, the following turning cycles are available to
you under Automatic:

Stock removal

Recess

Undercut

Thread

Parting
The parameters of the input screen forms (with the exception of
thread-cutting) correspond to the parameters under Automatic (see
Sec. "Turning").
In addition to the functions that are made available by "thread-cutting"
under Automatic, you can insert idle cuts during the machining
process under "Manual Machine".
You can interrupt the infeed of the cutting depth during the machining
process by inserting idle cuts, in order to smooth the flanks for
example.
You can insert idle cuts using the "Idle cut" softkey.
This softkey only works during machining.
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
6
♥ Siemens AG, 2005. All rights reserved