Siemens SINUMERIK 840D sl Operation/Programming Manual page 119

08/2005
3
Details
>
Original cut-away
Back to
original
Zoom
Zoom
+ or
Zoom
or
-
Magnifying glass
Zoom
Magnifying
glass +
Magnifying
glass -
Magnifying
glass zoom
Deleting machining lines
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
In addition, you can delete the previously drawn machining lines in the
graphics in order to get a clear display.
Press the "Details" softkey.
Press the "Back to original" softkey to restore the original size of
the viewport.
The workpiece on the main spindle or counter-spindle appears.
Press the "Zoom +" or "+", softkey if you would like to enlarge the
+
cut-away.
-or-
Press the "Zoom -" or "-", softkey if you would like to decrease the
size of the cut-away.
-or-
Press a cursor key if you want to pan the cut-away up, down, left,
or right.
The new cut-away appears.
Press the "Zoom" softkey.
A magnifying glass in the shape of a rectangular frame appears.
Press a cursor key if you want to move the magnifying glass up,
down, left, or right.
Press the "Magnifying glass +" softkey if you want to enlarge the
cut-away that you selected with the magnifying glass.
-or-
Press the "Magnifying glass -" softkey if you want to decrease the
size of the cut-away that you selected with the magnifying glass.
Press the "Magnifying glass zoom" softkey.
The new cut-away appears.
Press the "Del" key.
The previous machining lines are deleted.
Machining the Workpiece
3.11 Simulating machining
3
3-119