Siemens SINUMERIK 840D sl Operation/Programming Manual page 165

08/2005
5
Straight
polar >
Rapid
traverse
Parameters
L Distance between the pole and the end point of line
α
Polar angle (abs or inc)
The sign specifies the direction.
F Machining feedrate
Radius Input defining which side of the contour the tool machines in the programmed
compensation direction:
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
5.1 Straight or circular path movements
If you want to prevent deviation from the programmed path, you can
program the first straight line with radius compensation or with
deactivated radius compensation at a distance from the workpiece.
Programming without coordinate data is not possible.
Press the "Strai. Circle", "Polar" and "Straight polar" soft keys.
Polar >
Press the "Rapid traverse" soft key if you want to use rapid
traverse instead of a programmed machining feedrate.
Radius compensation to right of contour
Radius compensation to left of contour
Radius compensation off
The previously programmed setting for radius compensation is used
Description
ShopTurn Functions
5
Unit
mm
Degrees
mm/rev
mm/min
mm/tooth
5-165