Automatic Switch On/Off Rinsing; Every Time Before Filling; Internal Drinking Water Tank; Initiating Automatic Machine Cleaning - Schaerer Coffee Prime Operating Instructions Manual

www.schaerer.com
CAUTION!
User at risk!
CAUTION!
Hot fluid!
CAUTION!
User at risk!
CAUTION!
Risk of machine
damage!
46
Failure to observe the recommended cleaning intervals and instructions will lead to the
build-up of milk and bacteria. This results in a risk of contamination for the milk and Nc-
Foamer.
The machine cleaning process should be carried out at least once every 2 days.

Automatic switch on/off rinsing

The switch on/off rinsing must be activated by the service technician. If this is the case, the
switch on rinsing is run automatically after the machine is switched on, and the switch off rins-
ing before the machine is switched off.
The automatic switch on/off rinsing takes ca. 20 sec.

Every time before filling

Internal drinking water tank

There is a contamination danger for the drinking water tank due to deposits and bacte-
ria.
Clean the drinking water tank every time before filling it.
High temperatures may lead to damage.
Never clean the drinking water tank in the dishwasher.
► Thoroughly rinse the drinking water tank with fresh water several times.
► Clean the lid of the drinking water tank thoroughly with fresh water.
► Wipe with a clean, unused cloth.
► Fill the drinking water tank back up with fresh water.
► Fit the drinking water tank into the machine.
See "Cleaning" – "Weekly manual cleaning", for machines with an optional fixed water con-
nection.

Initiating automatic machine cleaning

The cleaning programme is started from the touch screen. On the touch screen, the user is
guided through all actions required of him or her.
► Press the [Service menu] field on the touch screen (see figure).
 The "Service menu" appears.
► Press the [Start cleaning] field (see figure).
 Cleaning begins.
 Guidance is provided for all necessary steps on the touch screen.
Cleaning
BASCP_EN
V08 | 08.2018