Schaerer Coffee Prime Operating Instructions Manual page 36

www.schaerer.com
36
► Swivel the NcFoamer 90° to the right and remove forwards away from the steam nozzle.
► Position the new NcFoamer on the steam nozzle. Note the colour code (see description
above).
► Swivel the new NcFoamer 90° to the left and engage in position.
► Guide the milk hose with milk nozzle to the right out of the machine.
► Close the service door
Option 1: Milk Smart
No more than 40 cm should be between the milk package and the beverage outlet.
► Have fresh, pre-cooled milk (3 – 5°C) ready.
► Hang the hose or hoses into the milk.
 The hose end must be in contact with the container floor.
See also "Safety notes" - "Hygiene" - "Milk".
Option 2: Side cooling unit
Check the cooling temperature of 3 – 5°C regularly.
See also "Safety notes" - "Hygiene rules" - "Milk".
► Open the door.
► Check the cooling temperature shown on the display.
► Remove and rinse the milk container.
► Pour in fresh, pre-cooled milk (3 – 5°C).
Ensure that the filled milk does not touch the closed milk container lid.
► Place the milk container into the cooling unit.
► Hang the hose or hoses into the container.
 The hose end must be in contact with the container floor.
► Close the door.
Option 3: Under-machine cooling unit
► Open the door.
► Remove and rinse the milk container.
► Pour in fresh, pre-cooled milk (3 – 5°C).
Ensure that the filled milk does not touch the closed milk container lid.
► Place the milk container into the cooling unit.
► Hang the hose into the container.
 The hose end must be in contact with the container floor.
Operation
BASCP_EN
V08 | 08.2018