Enabling/Disabling The Codesys Runtime Environment Monitor; Figure 6-5 Editing The Config File (Disabling The Monitor) - Hitachi HF-W100E/IoT User Manual

6. RAS FEATURES IN HF-W100E/IoT

6.3.2 Enabling/Disabling the CODESYS runtime environment monitor

You can enable and disable the CODESYS runtime environment monitor by editing the
CODESYS config file and changing the settings of the monitor service. The monitoring
functionality is enabled in the factory setting. Note that, if the CODESYS runtime
environment monitor is disabled, a shutdown of the CODESYS runtime environment will
not be detected.
(1) Disabling the CODESYS runtime environment monitor
(a) Editing the config file
1. Launch Notepad as administrator.
• If the OS is Windows® Embedded Standard 7, click Start, and then click All
Programs > Accessories. right-click Notepad. On the menu, click Run as
administrator.
• If the OS is Windows® 10, click Start, and then click Windows Accessories
from the list of applications. right-click Notepad. On the menu, click More >
Run as administrator.
• If the User Account Control window is displayed, click Yes.
2. Notepad starts. Click the File menu, and on the menu, click Open.
3. Select the CoDeSysControl.cfg file in C:\Program Files\3S CODESYS\CODESYS
Control RTE3, and then click Open.
4. The CoDeSysControl.cfg file opens. In the ComponentManager section, add
"; (semicolon)" to the beginning of the following line to comment out the WDT
control component (CmpHWdtControl).
Component.*=CmpHWdtControl
Note: The number added after "Component." is an index and different depending

Figure 6-5 Editing the Config File (Disabling the Monitor)

5. Click the File menu, and on the menu, click Save.
6. Close the CoDeSysControl.cfg file.
on the environment.
6-16