System Configuration - Sony HDCU3100 Operating Instructions Manual

System Configuration

Note
Production of some of the peripherals and related devices shown in the figures may have been discontinued.
For advice on choosing devices, please contact your Sony representative or dealer.
Connection example (optical fiber transmission)
Lens
(for ENG/EFP)
VCT-14
Tripod Adaptor
Tripod
Target color cameras
HDC3500, HDC2000 series
HSC300RF
Camera hanger
HDVF-EL70
Viewfinder
Lens
(for studio camera)
V-wedge shoe
(supplied with
tripod)
Tripod
HDVF-EL75/L750/L770
Viewfinder
BKW-401 Viewfinder
Rotation Bracket
Target color cameras
HDC3500, HDC3100, HDC2000 series
HSC300RF/100RF
USB flash drive
CAC-6
Return Video Selector
Intercom Headset
CAC-12
Microphone
Microphone
Holder
c)
,
d)
USB flash drive
CAC-6
Return Video Selector
Intercom Headset
Microphone
HDLA1500-series
Large Lens Adaptor
CAC-6
Return Video Selector
Intercom Headset
Microphone
BKP-7911
Script Holder
HDVF-200
HDVF-EL20
HDVF-EL30
Viewfinder
c)
,
Sync signal input
Return video input
Intercom microphone input
HDCU3100/HDCU3170
Hub
a) Set the signal type and signal transmission rate for the camera to connect
using the following menu items.
• SYSTEM CONFIG t <CAMERA I/F> t CABLE TYPE t FIBER CAMERA
CABLE
• SYSTEM CONFIG t <CAMERA I/F> t FIBER TRANSMIT RATE
(page 21)
b) Signal transfer up to a maximum of 2 km is possible. However, the actual
transfer distance may vary depending on the system configuration of the
cameras and the type of optical fiber cables used.
c) HDC2000 series: HDC2000/2580/2500/2400/1700
d) Supplied with HDLA1500 series (Part No.: A-1128-405-A)
e) For optical fiber transmission when the HDCU3170 is connected to an
HDC3500 Color Camera or HDC3100 Fiber Color Camera, attach the
HKCU-FB30 Optical Fiber Connector Kit.
4
2K Video
Monitor
CCA-5
a) e)
RCP-1500/1000 series
Remote Control Panel
Video Waveform
Monitor Monitor
Video Router
MSU-1000 series
Master Setup Unit