Sony HDCU3100 Operating Instructions Manual page 35

VIDEO/MONITOR
Page name Item
Page No.
<DISPLAY> MESSAGE
V06
Sets the items to be
displayed on the camera
setting status page of the
status display screen.
CAMERA
LENS FILE
MASTER GAIN
MASTER WHITE IND
SHUTTER
ND FILTER
CC FILTER
IRIS
EXTENDER
F DROP IND
MIC
AUDIO/INTERCOM menu
AUDIO/INTERCOM
Page name Item
Page No.
<MIC GAIN> CAM MIC GAIN
A01
<AUDIO OUT> DELAY
A02
AES/EBU OUT
ANALOG OUT
Set value
ALL, WARNING, OFF
ON, OFF
ON, OFF
ON, OFF
MODE STEP GAIN, MASTER WHITE, F
DROP GAIN, TOTAL GAIN
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
Set value
CH1 (---), 20, 30, 40, 50, 60 dB
CH2 (---), 20, 30, 40, 50, 60 dB
0, 5, 11, 16, 21, 27, 32, 37, 43, 48,
53, 59, 64, 69, 75, 80 ms
MIC1/2, AES/EBU
MIC1/2, AES/EBU
CH1: LEVEL –20, 0, +4 dBu
CH1: ADJUST –99 to 99, 0
CH2: LEVEL –20, 0, +4 dBu
CH2: ADJUST –99 to 99, 0
Description
Sets the display of messages for the camera auto
setup operation status, warnings that occur in the
system, etc.
ALL: Displays all messages.
WARNING: Displays system warning messages and
menu control messages.
OFF: Displays only menu control messages.
Displays or hides the model name of the connected
camera.
Displays or hides the LENS FILE name.
Displays or hides the master gain setting value.
Switches the MASTER GAIN display mode.
STEP GAIN: Displays the STEP GAIN value.
MASTER WHITE: Displays the MASTER WHITE
GAIN value.
F DROP GAIN: Displays the F DROP GAIN value.
TOTAL GAIN: Displays the total value of the STEP
GAIN, MASTER GAIN, and F DROP GAIN values
combined.
Displays or hides the enabled status of the master
white gain.
Displays or hides the shutter speed/ECS frequency
setting value.
Displays or hides the ND filter type.
Displays or hides the CC filter type.
Displays or hides the iris status.
Displays or hides the lens extender/digital extender
status.
Display or hides the F-drop status.
Displays or hides the camera microphone switch
status.
Description
Sets the camera microphone gain.
Set according to the microphone used.
(---): Displayed when a camera is not connected.
(Display only)
Sets the camera microphone output phase.
Selects the AES/EBU output.
MIC1/2: Outputs the camera MIC1/2 input from the
AES/EBU connector of the CCU.
AES/EBU: Outputs the camera AES/EBU input from
the AES/EBU connector of the CCU.
Selects the MIC OUT ANALOG output.
MIC1/2: Outputs the camera MIC1/2 input from the
AUDIO OUT connector of the CCU.
AES/EBU: Outputs the camera AES/EBU input from
the AUDIO OUT connector of the CCU.
Sets the AUDIO CH1 output level.
Sets the AUDIO CH2 output level.
35