Sony HDCU3100 Operating Instructions Manual page 24

SYSTEM CONFIG
Page name Item
Page No.
<MULTI FORMAT> SYSTEM
S05
CAMERA FORMAT
BIT DEPTH
CCU VIDEO
CONVERT
FRAME CONVERT
DELAY
HD-SD DELAY
Set value
1.001(525), 1.000(625)
When 1.001(525) is selected in
SYSTEM:
1080/59.94P (4K/HDR), 1080/
59.94P, 1080/59.94I, 1080/
29.97PsF, 1080/23.98PsF, 720/
59.94P, 1080/59.94I (RGB444),
1080/29.97PsF (RGB444), 1080/
23.98PsF (RGB444), 1080/
59.94I(2x), 720/59.94P(2x)
When 1.000(625) is selected in
SYSTEM:
1080/50P (4K/HDR), 1080/50P,
1080/50I, 1080/25PsF, 1080/
24PsF, 720/50P, 1080/50I
(RGB444), 1080/25PsF (RGB444),
1080/24PsF(RGB444), 1080/
50I(2x), 720/50P(2x)
10BIT, 12BIT
DISABLE, ENABLE
0.8, 1.2, 1.6 F@23.98PsF
LINE, FRAME
24
Description
Selects the operating frequency of the system.
Selects the system format.
Only 1080/59.94P and 1080/50P are displayed when
using HDCU3170.
Note
The formats available for selection vary depending
on the active format of the connected camera.
Sets the RGB4:4:4 output bit length, and changes
the CCU output format.
This can be selected only when CAMERA FORMAT
is set to 1080/59.94I (RGB444), 1080/29.97PsF
(RGB444), 1080/23.98PsF (RGB444), 1080/50I
(RGB444), 1080/25PsF (RGB444), or 1080/24PsF
(RGB444).
Not displayed when using HDCU3170.
Sets the video converter function.
When ENABLE is selected, set FRAME
SYNCHRONIZER to ON.
Tip: When CCU VIDEO CONVERT is set to
ENABLE, the video convert function within the CCU
introduces a delay, which is compensated for by
advancing the camera signal.
Sets the video delay time for 2-3 Pulldown.
This is enabled only when SYSTEM is 1.001 (525).
Not displayed when using HDCU3170.
Sets the phase output for SD signals down-
converted from HD signals.
The delay duration display will be as follows when
CAMERA FORMAT is set to a 1080 format.
When LINE is selected: 90H
When FRAME is selected: 1 frame
The delay duration display will be as follows when
CAMERA FORMAT is set to a 720 format.
When LINE is selected: 120H
When FRAME is selected: 2 frames