Sony HDCU3100 Operating Instructions Manual page 39

MAINTENANCE
Page name Item
Page No.
<MENU SETTINGS> PAGE RESUME
M02
ALARM JUMP
CAMERA MENU
CTRL
<DATE&TIME> DATE (YEAR)
M03
DATE (MONTH)
DATE (DAY)
TIME (HOUR)
TIME (MINUTE)
TIME ZONE (HOUR)
TIME ZONE
(MINUTE)
<TALLY INPUT> R-TALLY
M04
G-TALLY
Y-TALLY
<ALARM SETTINGS> FORCE LEGACY
M05
CABLE OPEN
GENLOCK ERROR
<SDI ANCILLARY DATA> VIDEO PAYLOAD ID
M06
EMBED AUDIO
EMBED META DATA
<FRONT PANEL> ASSIGNABLE
SWITCH
M07
SIGNAL BAR
<OPTION KEY> READ
M08
INSTALLED
OPTIONS
<MISC> OPTICAL SIGNAL
BACKUP
M09
Set value
ON, OFF
ON, OFF
OFF, ON
17 to 99
1 to 12
1 to 31
0 to 23
0 to 59
–23 to +23, 0
0 to 59
CONTACT, POWER(24V),
POWER(TTL)
CONTACT, POWER(24V),
POWER(TTL)
CONTACT, POWER(24V),
POWER(TTL)
OFF, ON
OFF, ON
OFF, ON
LATEST, 2002, 2010, 2011, 2017
OFF, ON
OFF, ON
NONE, BARS, CAM POWER,
FORCE LEGACY, OPTICAL
SIGNAL
DISPLAY OFF, ON
READY COLOR WHITE, GREEN, BARS
BRIGHTNESS LOW, MIDDLE, HIGH
Execute with ENTER.
ENABLE, DISABLE
Description
Turns the menu mode resume page display function
ON/OFF.
Turns the error-related page display function ON/
OFF for when an error occurs while in menu mode.
Displays the Camera menu.
Note
• If CAM MENU is set to ON, CCU menu operations
cannot be performed because only Camera menu
operations are available.
• The Camera menu is not displayed when SD
signal is output.
Sets the date and time.
Note
When this is changed, all logs stored on the unit will
be deleted.
Sets the time zone.
RED tally input setting
GREEN tally input setting
YELLOW tally input setting
Set to OFF to not display the FORCE LEGACY
alarm.
Set to OFF to not display the CABLE OPEN alarm.
Set to OFF to not display the GENLOCK ERROR
alarm.
Selects the standard year of the payload ID to be
added to the SDI VIDEO output.
Sets whether to embed audio in the SDI VIDEO
output.
Sets the function to be assigned to the assignable
button on the front panel.
NONE: No assignment.
BARS: Sets the color bar output to ON/OFF.
CAM POWER: Sets camera power to ON/OFF.
FORCE LEGACY: Forces the communication mode
to LEGACY mode.
OPTICAL SIGNAL: Turns the optical signal output
from the CCU to the camera ON/OFF. (Disabled
when using HDCU3170)
Switches the signal bar display on the front panel.
Sets the color for the ready status (during color bar
output).
Sets the signal bar brightness level.
Reads the installation key from the USB flash drive.
List of installed options. (Display only)
Sets whether to save the state of the OPTICAL
SIGNAL setting on the <CAMERA I/F> page of the
SYSTEM CONFIG menu for the next startup.
39