Sony HDCU3100 Operating Instructions Manual page 26

SYSTEM CONFIG
Page name Item
Page No.
<OUTPUT FORMAT1> SDI-OUT3
S07
SDI-OUT4
Set value
MONITOR C, M
FORMAT See "Formats settable for the SDI
OUT / SDI I/O connectors"
(page 31).
OETF SDR, HDR OETF
COLOR BT709, BT2020
MONITOR C, M
FORMAT See "Formats settable for the SDI
OUT / SDI I/O connectors"
(page 31).
OETF SDR, HDR OETF
COLOR BT709, BT2020
Description
Sets the output for the SDI OUT 3 connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
M: Characters are added.
Sets the output signal format for the SDI OUT 3
connector.
Sets the gamma curve of the video output.
Fixed to SDR when using HDCU3170.
Selects the color space of SDI OUT3 video output.
Fixed to BT709 when using HDCU3170.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Sets the output for the SDI OUT 4 connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
M: Characters are added.
Note
When this is set to C (characters are not added), the
CCU MENU will not be displayed. To display it, hold
the DISP/MENU lever in the MENU position for 3
seconds.
Sets the output signal format for the SDI OUT 4
connector.
Sets the gamma curve of the video output.
Fixed to SDR when using HDCU3170.
Selects the color space of SDI OUT4 video output.
Fixed to BT709 when using HDCU3170.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
26