Genie S-40 Service Manual page 34

October 2013
Scheduled Maintenance Procedures
Observe and Obey:
Maintenance inspections shall be completed by
a person trained and qualified on the
maintenance of this machine.
Scheduled maintenance inspections shall be
completed daily, quarterly, six months, annually
and every 2 years as specified on the
Maintenance Inspection Report. The frequency
and extent of periodic examinations and tests
may also depend on national regulations.
Failure to perform each procedure
as presented and scheduled may
cause death, serious injury or
substantial damage.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating machine
Use only Genie approved replacement parts.
Machines that have been out of service for a
period longer than three months must complete
the quarterly inspection.
Unless otherwise specified, perform each
maintenance procedure with the machine in the
following configuration:
• Machine parked on a firm, level surface
• Boom in the stowed position
• Turntable rotated with the boom between
the non-steer wheels
• Turntable secured with the turntable
rotation lock
• Key switch in the off position with the
key removed
• Wheels chocked
• All external AC power supply disconnected
from the machine
Part No. 102521
Section 3 • Scheduled Maintenance Procedures
About This Section
This section contains detailed procedures for each
scheduled maintenance inspection.
Each procedure includes a description, safety
information and step-by-step instructions.
Symbols Legend
Indicates that a specific result is expected after
performing a series of steps.
Indicates that an incorrect result has occurred
after performing a series of steps.
S-40 • S-45
Safety alert symbol—used to alert
personnel to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Used to indicate the presence of
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
Used to indicate the presence of a
potentially hazardous situation
which, if not avoided, could result
in death or serious injury.
With safety alert symbol—used to
indicate the presence of a
potentially hazardous situation
which, if not avoided, may cause
minor or moderate injury.
Used to indicate the presence of a
potentially hazardous situation
which, if not avoided, may result in
property damage.
3 - 1