Genie S-40 Service Manual page 21

October 2013
Continued use of Chevron Aviation
A hydraulic oil when ambient
temperatures are consistently
above 32°F / 0°C may result in
component damage.
Note: Use Chevron Aviation A hydraulic oil when
ambient temperatures are consistently
below 0°F / -18°C.
Note: Use Shell Tellus S2 V 46 hydraulic oil when
oil temperatures consistently exceed 205°F / 96°C.
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Industries Service Department before use.
Part No. 102521
Hydraulic Component
Specifications
Drive pump
Type:
Displacement per revolution, variable, 4WD models
Flow rate @ 2500 rpm
Drive pressure, maximum
Charge pump
Type:
Displacement
Flow rate @ 2500 rpm
Charge pressure @ 2500 rpm
Neutral position
Function pump
Type
Displacement
Flow rate @ 2500 rpm
Oscillation pump
Type
Displacement
Flow rate @ 2500 rpm
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
S-40 • S-45
Section 2 • Specifications
SPECIFICATIONS
bi-directional,
variable displacement piston pump
0 to 2.8 cu in
0 to 28 gpm
gerotor pump
34.1 L/min
gear, pressure balanced
10.69 gpm
40.5 L/min
gear, fixed displacement
2.8 gallons per minute
10.6 liters per minute
0 to 46 cc
106 L/min
3625 psi
250 bar
0.85 cu in
13.9 cc
9 gpm
310 psi
21.4 bar
1.04 cu in
17 cc
0.37 cu in
6 cc
2 - 3