Manifold Component Specifications; Valve Coil Resistance Specifications - Genie S-40 Service Manual

October 2013
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Part No. 102521
Valve Coil Resistance
Specifications
Note: The following coil resistance specifications
are at an ambient temperature of 68°F / 20°C. As
36 in-lbs / 4.1 Nm valve coil resistance is sensitive to changes in air
temperature, the coil resistance will typically
10 ft-lbs / 13.6 Nm
increase or decrease by 4% for each 18°F / 20°C
that your air temperature increases or decreases
14 ft-lbs / 19 Nm
from 68°F / 20°C.
38 ft-lbs / 51.5 Nm
Description
41 ft-lbs / 55.6 Nm
Solenoid valve, 2 position 3 way, 10V DC
56 ft-lbs / 75.9 Nm
(schematic items AC and AE)
Solenoid valve, 3 position 4 way, 10V DC
(schematic item AT and AZ)
Solenoid valve, 2 position 3 way, 10V DC
(schematic items AU, AV, AX, and AY)
Solenoid valve, 3 position 4 way, 10V DC
(schematic items AZ and BF)
Proportional solenoid valve, 12V DC
(schematic items AW and BB)
Solenoid valve, 2 position 3 way, 10V DC
(schematic item CC)
Solenoid valve, 2 position 3 way, 10V DC
(schematic items DA)
Solenoid valve, 2 position 3 way, 12V DC
(schematic items CE)
S-40 • S-45
Section 2 • Specifications
SPECIFICATIONS
Specification
6.3 Ω
6.3 Ω
6.3 Ω
6.3 Ω
9 Ω
6.8 Ω
3.3 Ω
4.8 Ω
2 - 5