Christ Alpha 3-4 LSCbasic Operating Manual page 60

Freeze-dryer Alpha 3-4 LSCbasic
6 Operation
NOTE
60 / 97
Access protection (4)
In this dialogue box, the access rights can be managed on several levels
and they can be protected with a password.
In the factory setting with activated access protection, data can be viewed
but not edited.
Fig. 40: Dialogue box "Access protection"
The other buttons cannot be activated unless the access protection is
active.
Password timer runtime: In order to prevent unauthorised access, the
system will automatically switch back to the default setting after a pre-
defined period of time.
In this case, there is a small lock symbol in the status line and below this
symbol the remaining time until the lock will be active is counted down. At
the same time, a button with a big lock symbol will be displayed under the
status line.
Fig. 41: Countdown of the password timer and the button with the lock symbol
•
The button with the lock symbol blocks any access immediately and the
system switches to the default setting.
Fig. 42: Access blocked, data editing not possible
Version 11/2018, Rev. 1.2 of 05/03/2019 • sb-pe
Translation of the original operating manuel