Safety Notes Concerning The Transport, Set-Up And Connection And Initial Start-Up Of The Freeze-Dryer; General Hazards; Hazards Caused By Improper Transport; Hazards Caused By Improper Set-Up - Christ Alpha 3-4 LSCbasic Operating Manual

3.6 Safety notes concerning the transport, set-up and connection and
initial start-up of the freeze-dryer
3.6.1

General hazards

WARNING
3.6.2

Hazards caused by improper transport

DANGER
3.6.3

Hazards caused by improper set-up

WARNING
Version 11/2018, Rev. 1.2 of 05/03/2019 • sb-pe
Translation of the original operating manuel
The following notes and instructions must be observed in order to protect
all persons and property.
General risk of injury
Among the general hazards during the transport, set-up and connection
and start-up of the freeze-dryer are impact hazards, crushing hazards,
grazing hazards, cutting hazards, etc.
This may lead to severe injuries.
•
Comply with the fundamental health and safety rules and regulations
as well as with the rules and regulations for the prevention of
accidents!
•
Wear personal protective equipment (safety shoes, work gloves, and
hardhat)!
Risk of injury caused by the uncontrolled movement of loads
Units that are not properly fastened or secured may shift, or fall over.
•
Prior to transporting or setting-up the freeze-dryer, read the chapter 4 -
"Storage and transport" thoroughly!
Risk of injury caused by poor accessibility of the freeze-dryer
In cramped spaces or locations with poor accessibility, sharp edges and
corners may protrude into the work area.
This may lead to injuries caused by impact hazards or grazing hazards.
•
Ensure that the freeze-dryer is set up freely accessible!
•
Comply with the fundamental health and safety rules and regulations
as well as with the rules and regulations for the prevention of
accidents!
Freeze-dryer Alpha 3-4 LSCbasic
3 Safety
25 / 97