Freeze-dryer Alpha 3-4 LSCbasic
3 Safety
3.4
Operating personnel
3.5
Informal safety notes
24 / 97
the material (stainless steel 1.4404 and 1.4435, borosilicate glass,
EPDM, PVDF, ceramic AI
strength is prohibited.
•
The system must be maintained at regular intervals (see chapter 8 -
"Maintenance and service").
•
Any parts or components that are not in perfect working order must be
replaced without delay.
It must be ensured that persons operating the unit
•
are 18 years old or older,
•
have been specifically ordered to operate the unit and made aware of
dangers originating from the freeze-dryer, supply media, starting and
end products by the operator,
•
be familiar with the fundamental regulations concerning workplace
safety and accident prevention
•
have been trained in terms of the operation of this unit, and
•
have read and understood this operating manual (and in particular the
safety sections and warning notes) and confirmed this with their
signature.
This operating manual is part of the product.
•
This operating manual must be kept at the location of use of the freeze-
dryer. Ensure that it is accessible at all times.
•
The operating manual must be handed over to every subsequent owner
or user of the freeze-dryer.
•
Any changes, additions or updates received must be added to the
operating manual.
•
In addition to the operating manual, the general and operational rules
and regulations for the prevention of accidents and the protection of the
environment must be provided.
•
All of the safety and hazards notes on the freeze-dryer must be kept
readable at all times. If necessary, they must be replaced.
O
and PTFE) or decrease the mechanical
2
3
Version 11/2018, Rev. 1.2 of 05/03/2019 • sb-pe
Translation of the original operating manuel
Need help?
Do you have a question about the Alpha 3-4 LSCbasic and is the answer not in the manual?
Questions and answers