ESDEC FlatFix Fusion Manual page 5

Standards, specifications and regulations
When installing the mounting system, it is important to follow the installation instructions and the associated standards in
order to prevent accidents. Keep the following standards, specification and regulations particularly in mind:
Building Act Construction
•
PPE Personal Protective Equipment
•
KEMA Inspection of Electro-technical Materials
•
DIN 1055 Design loads for buildings
•
DIN 18299 General rules for all construction sectors
•
DIN 18451 Scaffolding
•
NEN EN 1991
•
NEN 7250
•
Removal and disassembly
Dispose of the product according to the local laws and regulations. All materials are recyclable at the end of their service life.
The aluminium base profiles are attached to the base elements by means of a click-system. Use combination pliers to
disassemble the base profile.
Guarantee
Guarantee according to the guarantee conditions and general terms and conditions of Esdec BV. These can be found on
the website www.clickfit.nl.
Liability
The manufacturer accepts no liability for damage or injury caused by not (strictly) adhering to the safety regulations and
instructions contained in this manual, or by carelessness during installation of the product specified in this document and
the eventual related accessories.
• printing errors reserved
Rev. 30.11.17 MANUAL FLATFIX FUSION MOUNTING SYSTEM FOR FLAT ROOFS
03