Advertisement
Now sand the flush the overlaying ends.
3. Front Windows
In the next step the front windows 38 and 39
will be fitted..
39
38
First bevel the lower edge of the centre part
about 45 degrees.
Stand Juli 2014
37
sand
to the re-
quired an-
gle.
39
Seite 8
The front windows at the side have to be bev-
elled at the lower edge and at the edge to the
centre window.
sand to the
required
angle
In the next step you have to sand the contour
of the main roof on top of the front windows in
the same way as the contours of the frame and
back wall. Then sand the side edges flush with
the side walls.
4. Cockpit
At this stage you will make the cockpit. For this
you will need parts 49, 50 and 51.
51
©
Krick Modelltechnik Knittlingen
sand to the
required angle
angular
50
49
50
Advertisement
