Advertisement
II SUPERSTRUCTURE
1. Cabin
For the first step of building the superstructure
you will need parts 32, 33, 34 und 40.
Now draw the outline of the windows to the
glazing material of PVC (100). Make them
slightly oversize to allow for gluing to the
frames.
32
40
33
32
Dry fit the parts first. If necessary sand the
slots or tenons for a perfect fit. Now first glue
the side walls to the frame and back wall.
When the gluing points are dry you can glue
the bar (40) in place.
2. Cabin Roof Front
Now place the front roof (35) with its cut out
corners between the two side walls and glue
only at the cut outs.
Stand Juli 2014
34
Fix the roof at its cut outs with superglue.
When the glue is dry, bend the side to the
curve of the roof and fix with superglue.
When the glue is dry, do the same on the other
side. After this apply glue from inside, and then
fix with clamps.
Now fit the front part (37) to the superstructure.
The upper edge needs to be sanded at an
angle to fit correctly.
Seite 7
35
©
Krick Modelltechnik Knittlingen
Advertisement
