Advertisement
Now fix the tube and the motor mount with
UHU Plus Acrylit inside the hull and fill the end
of the hull around the shaft with glue so that it
is water tight.
After the glue is set, you can also fix the rudder
shaft and the battery platform in the same way.
9. Gluing the Deck
Now all interior is placed correctly inside the
hull. So it is time to fix the deck permanently on
the hull. Fix the deck with adhesive tape to the
hull in a way, that the side walls of the hull are
pressed equally to the deck without getting
waves.
Fix the deck at several points with thin super-
glue. After that you can fix the deck complete
with medium superglue You can use an activa-
tor spray to shorten the drying process.
Stand Juli 2014
After the glue is dry you should sand the over-
lying border of the hull down to deck level. If
gaps appear, you can fill them with a wood
filler.
Seite 6
©
Krick Modelltechnik Knittlingen
Advertisement
