Advertisement
10. Firemonitor
Now build the fire monitor from parts 121, 122,
123, 124, 125, 126, 127, 128, 129, 130, 131
and 132.
126
125
123
124
122
121
First build the base and the upper angle.
Next glue the bottom tube into the base.
Now fit brass parts 128 und 129 together.
128
Stand Juli 2014
128
129
132
130
130
129
Seite 15
Press jet 128 into tube 129.
Now glue the upper angle to the base.
After painting slide the tube through the upper
angle and slide it into the black silicon tube
134. Then glue the tube into the upper angle.
At last glue the axle 131 into the hand wheel
132 and fix it to the monitor.
131
132
©
Krick Modelltechnik Knittlingen
134
Advertisement
