Image Pre-Acquisition Controls (Auto Mode); Controls (Post-Acquisition) - Welch Allyn RetinaVue 100 Imager Pro Directions For Use Manual

Directions for use

Image Pre-acquisition controls (Auto mode)

From the Home screen touch Exam. The Exam Pre-acquisition screen appears.
No. Feature
START
1.
mode.
2.
the Capture settings screen. Adjust the flash
brightness (-2 to +2) or the focus settings (-1 to
+1).
3.
next image in the sequence.

Controls (Post-acquisition)

On the Post-acquisition screen, images with a green check (
(scores of 40 +), images with a yellow check (
20 — 39), and those with a red x (
enters automatic image acquisition
(Image Acquisition Settings) navigates to
(Image Order) skips to the
No. Feature
4.
Navigates to the Home screen.
MANUAL
switches to advanced image capture
5.
options.
(Next) skips to the next image acquisition within
6.
a prescribed image acquisition sequence or navigates to
the Exam summary screen if the last image has been
acquired.
) are of acceptable quality (scores of
) are of unacceptable quality (scores of 0 — 19).
Navigation controls 71
) are of good quality