Welch Allyn RetinaVue 100 Imager Pro Directions For Use Manual page 27

Directions for use
The Patient ID field is the only Required field and is noted with a red asterisk. Once
added, the required Patient ID will appear in the top left of the Pre-acquisition screen
as the camera enters the Pre-acquisition mode.
3. Touch within the Patient ID field to launch the on-screen keyboard. Enter the Patient
ID and touch OK.
4. (Optional) Touch within the Patient's Last name, First name, or Middle initial to enter
the patient's last name, first name and middle initial. Touch OK.
5. (Optional) Enter the patient's Date of Birth. Touch within the DOB/Gender field to
launch the on-screen keyboard and to enter the patient's Date of Birth. Touch OK.
6. (Optional) Enter the patient's gender using the radio button to select male (M) or
female (F).
7. Once all the required fields are complete, touch OK to open a new exam. The Pre-
acquisition screen appears.
CAUTION When manually entering patient information, do
not use the same patient identifier for multiple patients. This
may result in inaccurate data association.
Using the RetinaVue 100 Imager Pro 23