Table of Contents
Advertisement
34 Using the RetinaVue 100 Imager Pro
Note
15. When the sequential image capture is complete and the images contain a green or
yellow quality acceptance check mark, proceed to the Exam summary screen.
Note
Perform a manual image capture while in Auto exam mode
1. From the Pre-acquisition screen, touch Start.
2. Touch
An audible tone alerts you that the image has been captured. The acquired image
appears on the LCD touchscreen for review in about five seconds.
Touch
to review the current image. Images with a red
X (
) denote low quality images. Touch
to the Acquisition screen) or touch
Pre-acquisition screen) to dispose of an image and then
touch
(Add image) to begin a capture of another
image.
To add missing patient context information touch
then touch
to create a new patient, or touch on an
existing patient's name from within the Patients screen to
select that patient. Touch Save to save the exam images.
or
(image capture) to manually capture an image.
Welch Allyn RetinaVue™ 100 Imager Pro
(navigates
(navigates to the
and
Hide quick links:
Advertisement
Table of Contents
