Welch Allyn RetinaVue 100 Imager Pro Directions For Use Manual page 18

14 Using the RetinaVue 100 Imager Pro
Note
Eye cup
The eye cup blocks ambient light during testing and covers the patient's eye socket to
allow them to best focus on the green fixation lights. The eye cup works on the patient's
left and right eye.
Set up the eye cup for a patient exam
1. Remove the lens cap from the RetinaVue 100 Imager.
2. Slide the eye cup over the bezel on the RetinaVue 100 Imager.
3. Use the eye cup to cover the patient's examined eye and allow them to focus on the
green fixation lights.
Do not over-tighten the screws.
Welch Allyn RetinaVue™ 100 Imager Pro