Welch Allyn RetinaVue 100 Imager Pro Directions For Use Manual page 52

48 Maintenance
Cleaning the docking station charger
Use a pre-moistened wipe or soft cloth slightly moistened with an approved cleaner to
gently clean the docking station charger.
Disinfecting the RetinaVue 100 Imager, eye cup, and docking station
charger
Note
Use a pre-moistened wipe or soft cloth slightly moistened with an approved disinfectant
to disinfect the RetinaVue 100 Imager, eye cup, and docking station charger. Follow the
manufacturers recommendations.
Approved cleaning agents
Use only the following approved cleaning agents on the RetinaVue 100 Imager, eye cup,
and docking station charger:
• 70 percent isopropyl alcohol
• CaviWipes
•
Sani-Cloth
•
Super Sani-Cloth
The RetinaVue 100 Imager has been tested to verify these instructions as being capable
of preparing the RetinaVue 100 Imager for re-use. You must ensure that cleaning and
disinfection as actually performed by your personnel, with your equipment and materials,
achieves the desired result. This may require validation and routine monitoring of your
actual process.
Disinfect according to your facility's protocols and standards or local
regulations.
®
Plus
®
Welch Allyn RetinaVue™ 100 Imager Pro