General Information; About This Manual; Intended Use - Welch Allyn 300 Series Directions For Use Manual

1

General information

About this manual

This manual contains information about the Welch Allyn
monitor. The series includes the following models:
Model Features
53000 Standard (NIBP, Pulse Rate, and MAP)
5300P Standard + Printer
530T0 Standard + Temperature
530TP Standard + Temperature + Printer
All operators must read and understand this manual before using the monitor.
All technicians and other service personnel must read and understand this manual before
attempting to set up, configure, troubleshoot, or service the monitor.
All information in this manual, including the illustrations, is based on a monitor configured
with the Temperature, SpO
of these options, then some information in this manual does not apply.

Intended use

The VSM series of monitors are intended to be used by clinicians and medically qualified
personnel for monitoring of noninvasive blood pressure, pulse rate, body temperature,
noninvasive functional oxygen saturation of arteriolar hemoglobin (SpO
temperature in normal and axillary modes of neonatal, pediatric and adult patients.
The most likely locations for patients to be monitored are general med/surg. floors,
general hospital and alternate care environments. This device is available for sale only
upon the order of a physician or licensed health care professional.
Model Features
53S00 Standard + Masimo
53ST0 Standard + Masimo SpO
53S0P Standard + Masimo SpO
53STP Standard + Masimo SpO
, and Printer options. If your monitor configuration lacks any
2
®
Vital Signs Monitor 300 Series
®
SpO
2
+ Temperature
2
+ Printer
2
+ Temperature + Printer
2
), and body
2
1