Deactivating The Timer - Thermo Scientific Safe 2020 Operating Instructions Manual

6. Handling and control
NOTE – Activating the timer
If the timer is to be activated without a prior
change of the time values, the procedure
above is performed and the existing time
values are confirmed:
Press, then release the
value.
After the minute value has been confirmed, the
timer has been activated.
NOTE – Timer function
The timer can not be used as a start routine
that calls up its function automatically.
It must be reactivated separately for each
deferred device start.
6.3.14

Deactivating the timer

If the device was started at a preset time, the timer function is also deactivated
automatically. The deferred start can therefore be cancelled only while the
device is still in the OFF mode.
• To deactivate the timer function for starting the device:
Keep the
The safety cabinet changes to the work mode.
The status indicator
shows the current time.
key for each
key depressed until the ready signal sounds
illuminates continuously, and the display
Operating Instructions Safety Cabinet Safe 2020 / Maxisafe 2020
45