2. Mechanism
This chapter provides explanation on the basic electrophotographic process of the engine by referring
to the items of the Detailed settings.
Electrophotographic process - Overview
1
S
Y
9
1. Laser unit
2. Laser beam
3. Charger roller
4. Photoconductor unit
5. Development roller
6. Intermediary transfer belt(ITB)
7. Image transfer roller
8. Paper transfer roller(PTR)
9. Fusing unit
The electrophotography process consists of the following steps:
Photoconductor unit charge
• Photoconductor unit charge ...... The charge roller [3] gives an equal charge across the surface of
the photoconductor unit [4].
• Laser exposure ...... Laser beam [2] creates an electrostatic latent image on the photoconductor
unit [4].
• Development ...... The development roller [4] carries toner to the latent image on the
photoconductor unit [4].
M
C
K
8
7
6
Laser exposure
Development
3
4
2
5
M0EBIC1101
Transfer
Fusing
5