Sequence Of An Automatic Programme; Changing Settings During A Programme; Cancelling Cooking - Miele DGC 6300 Operating And Installation Instructions

Operation: Combination cooking mode
Sequence of an automatic
programme
Up until the start time the function, the
selected temperature and moisture
level, Start at and the start time will
appear in the display.
After the start time you can see the
temperature increasing in the display
during the heating-up phase until the
set temperature is reached. Once this
temperature is reached a tone will
sound.
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the programme the
steam generator and oven
compartment lighting will switch off. A
tone or a melody will sound (see
"Settings - Acoustic tones").
Steam reduction (only with temperatures
of approx. 80 - 100 °C and 100%
moisture) and Prog. finished
in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via .
42
Changing settings during a
programme
 Touch .
The following will appear in the display:
– all individual cooking stages
–
You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.
 Scroll through the list until the
 Confirm with OK.
 Alter the cooking stages as you wish
A summary of your settings will appear
in the display.
 Check the settings and confirm with
will appear

Cancelling cooking

 Turn the function selector to •.
Select function
Any cooking durations set are deleted.
Add cooking stage
cooking stage you want or
cooking stage is highlighted in the
display.
(see "Simple operation") and confirm
with OK.
OK.
will appear in the display.
Add