Sequence Of An Automatic Programme; Changing Settings During A Programme - Miele DG 6800 Operating And Installation Instructions

Operation
Sequence of an automatic
programme
Up until the start time the function,
the selected temperature, cooking
duration (time left),
time will appear in the display.
After the programme has started you
can follow the heating-up phase in the
display until the required temperature
has been reached.
Once this temperature is reached a
buzzer will sound, if this option has
been switched on (see "Settings -
Volume - Buzzer tones").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the programme a buzzer
will sound, if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
The steam generator and lighting will
switch off.
Steam reduction
temperature above approx. 80 °C) and
will appear in the
Process finished
display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via
twice to go to the main menu.
34
and the start
Start at
(only with a
. Touch 
Change
Changing settings during a
programme
 Select .
Change
The following will appear in the display:
–
Temperature
–
Duration
–
Ready at
–
Start at
If the temperature in the oven is too
high and
Ready at
displayed.
–
Open further settings
Changing the temperature
 Change the temperature.
 Confirm with OK.
The programme will restart with the
new temperature.
You can permanently reset the
recommended temperature to suit
your personal cooking preferences.
(See "Settings - Recommended
temperatures").
Changing the cooking duration
 Change the duration.
 Confirm with OK.
The programme will restart with the
new duration.
are not
Start at