Miele DGC 6300 Operating And Installation Instructions page 132

Cleaning and care
A message will appear in the display:
 Fill the water container with 1 litre of
fresh tap water and add the correct
amount of descaling agent.
 Push the water container into the
appliance until it connects.
 Confirm with OK.
The descaling process will now begin
and the duration remaining will count
down in the display.
It is only possible to cancel the
descaling process during the first
6 minutes. Do not switch the
appliance off during the descaling
process. If it is switched off before the
end of the process, the whole process
will have to be started from the
beginning again.
The water container will need emptying
and refilling with fresh tap water during
descaling.
Follow the instructions in the display:
 Remove the water container and take
the insert out.
 Empty the water container.
 Rinse the water container and the
insert thoroughly.
 Fill the water container with 1 litre of
fresh tap water and replace the insert.
 Push the water container into the
appliance until it connects.
 Confirm with OK.
Once the duration remaining has
elapsed, place Prog. finished
in the display.
132
After descaling
 Switch the steam oven off.
 Remove, empty and dry the water
 Allow the oven compartment to cool
 Then dry the oven compartment.
 Leave the appliance door open until
will appear
container.
down.
the oven interior is completely dry.