Sequence Of An Automatic Programme; Changing Settings During A Programme - Miele dgc 6805 Operating And Installation Instructions

Operation: Steam cooking
Sequence of an automatic
programme
Up until the start time the function,
the selected temperature, cooking
duration (time left),
time will appear in the display.
After the start time you can see the
temperature increasing in the display
during the heat-up phase until the set
temperature is reached. Once this
temperature is reached a buzzer will
sound, if this option has been switched
on (see "Settings – Volume – Buzzer
tones").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the cooking duration
the steam generator will switch off. A
buzzer will sound if this option has
been switched on (see "Settings –
Volume – Buzzer tones").
(for temperatures over
Steam reduction
approx. 80 °C) and
appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via
twice to go to the main menu.
40
and the start
Start at
will
Process finished
. Touch 
Change
Changing settings during a
programme
 Select .
Change
The following will appear in the display:
–
Temperature
–
Duration
–
Ready at
–
Start at
If the temperature in the oven is too
high and
Ready at
displayed.
–
Open further settings
Changing the temperature
 Change the temperature.
 Confirm with OK.
The programme will restart with the
new temperature.
You can permanently reset the
recommended temperature to suit
your personal cooking preferences.
(See "Settings - Recommended
temperatures").
Changing the cooking duration
 Change the duration.
 Confirm with OK.
The programme will restart with the
new duration.
are not
Start at