Sequence Of An Automatic Programme; Changing Settings During A Programme - Miele DGC 6860 Operating And Installation Instructions

Operation: Steam cooking
Sequence of an automatic pro‐
gramme
Up until the start time the function,
the selected temperature, cooking du‐
ration (time left),
time will appear in the display.
After the start time you can see the
temperature increasing in the display
during the heat-up phase until the set
temperature is reached. Once this tem‐
perature is reached a buzzer will sound,
if this option has been switched on (see
"Settings – Volume – Buzzer tones").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the cooking duration
the steam generator will switch off. A
buzzer will sound if this option has
been switched on (see "Settings – Vol‐
ume – Buzzer tones").
(for temperatures over
Steam reduction
approx. 80 °C) and
appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via
twice to go to the main menu.
42
and the start
Start at
Process finished
. Touch 
Change
Changing settings during a pro‐
gramme
 Select
The following will appear in the display:
–
Temperature
–
Duration
–
Ready at
–
Start at
If the temperature in the oven is too
high
Ready at
played.
–
Open further settings
Changing the temperature
 Change the temperature.
 Confirm with OK.
The programme will restart with the
new temperature.
You can permanently reset the recom‐
will
mended temperature to suit your per‐
sonal cooking preferences. (See "Set‐
tings - Recommended temperatures").
Changing the cooking duration
 Change the duration.
 Confirm with OK.
The programme will restart with the
new duration.
.
Change
and
Start at
are not dis‐