Sequence Of An Automatic Programme; Changing Settings During A Programme - Miele DGM 6800 Operating And Installation Instructions

Operation: Steam cooking
Sequence of an automatic
programme
Up until the start the function, the
selected temperature, cooking duration
(time left), Start at
appear in the display.
After the start you can see the
temperature increasing in the display
during the heat-up phase until the set
temperature is reached. Once this
temperature is reached a buzzer will
sound, if this option has been switched
on (see "Settings – Volume – Buzzer
tones").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
Shortly before the end of the
programme, if you are cooking at a
temperature above approx. 80 °C
reduction will appear in the display and
the door will automatically open a little.
At the end of the programme the
steam generator will switch off. A
buzzer will sound if this option has been
switched on (see "Settings – Volume –
Buzzer tones").
Process finished
appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via
twice to go to the main menu.
44
and the start time will
Steam
will
. Touch 
Change
Changing settings during a
programme
 Select
.
Change
The following will appear in the display:
– Temperature
–
Duration
– Ready at
–
Start at
If the temperature in the oven is too
high and
Ready at
displayed.
– Open further settings
The function can be changed by
selecting Open further settings
Changing the temperature
 Change the temperature.
 Confirm with OK.
The programme will restart with the new
temperature.
You can permanently reset the
recommended temperature to suit
your personal cooking preferences.
(See "Settings - Recommended
temperatures").
Changing the cooking duration
 Change the duration.
 Confirm with OK.
The programme will restart with the new
duration.
are not
Start at
.