Perfectclean - Miele DGC 6300 Operating And Installation Instructions

PerfectClean

The oven interior and side runners are
made from stainless steel which has
been treated with a special
PerfectClean finish which gives the
surface an iridescent appearance.
PerfectClean surfaces have very good
non-stick properties and are easy to
clean.
However, it is very important to clean
the surfaces each time the oven is
used.
The surface will become harder to clean
and the non-stick properties will
deteriorate if soiling is not removed after
each use and allowed to build up.
Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Exercise
caution, make sure the oven is not hot.
Spilt fruit juices may cause
discolouration of the surfaces. This
discolouration is permanent but will not
affect the efficiency of the surface.
Remove residual cleaning agent after
cleaning. If left it will reduce the non-
stick properties of the PerfectClean
surfaces.
Cleaning and care
To protect the non-stick effect of
PerfectClean surfaces please avoid:
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– cleaning agents for ceramic hobs
– ceramic and stainless steel hob
cleaner
– wire wool
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents
– oven sprays
– cleaning in the dishwasher
– spot cleaning
125