Table of Contents
Advertisement
More about manual operation
Delaying the start with Automatic
switch-off
We recommend using automatic
switching on and off when roasting.
However, do not delay the start for
too long when baking as the cake
mixture or dough will dry out, and
the raising agents will lose their
effectiveness.
To switch a programme on and off
automatically you have various
options:
– Enter the Duration and Finish time.
– Enter the Start time and the Duration.
– Enter the Start time and the Finish.
Example:
The time is 11:30. Your dish will take
30 minutes to cook, and needs to be
ready at 12:30.
Select Duration and enter 0:30 h.
Then select Finish and enter 12:30 h.
The Start time will be calculated
automatically. "Start at 12:00" will
appear in the display.
The cooking programme will start at this
time.
34
Sequence of the cooking programme
when using Automatic switch-off
The following will appear in the display:
Before the programme starts
– The cooking function and selected
temperature
– "Start at" and the start time
After the programme has started
– The heating-up phase until the set
temperature is reached
– Once this temperature is reached, a
tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
After the heating-up phase
– The "Time left" counting down
Shortly before the end of the
programme
– The oven heating switches off.
– The cooking programme continues
using residual heat. The residual
heat in the oven is sufficient to
complete the cooking process.
– Energy save phase will appear in the
display.
– The cooling fan continues to run, as
does the hot air fan if a "Fan" setting
has been chosen.
At the end of the cooking programme
– The hot air fan switches off,
depending on the cooking function
being used.
– The message "Programme finished"
and the
symbol appear in the
O
display.
– A tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
Hide quick links:
Advertisement
Table of Contents
